|
Home
Up
| |
TiCK4 - $25
The TiCK-4 offers all the features of
the TiCK-1, TiCK-2, TiCK-2B, and TiCK-3, plus it offers non-volatile parameter
memory! All this in the familiar TiCK 8 pin footprint.
Summary of TiCK-4 Features
- Two 50 character, user programmable
message memories
- NEW! Non-volatile parameter memory,
means no more resetting speed, mode, and other settings after power cycling
the TiCK! You can configure the TiCK-4 to you personal settings, and they
will remain in effect until YOU change them!
- Pin-for-pin compatible with all
other TiCKs (TiCK-1 / TiCK-2 / TiCK-2B / TiCK-3)
- Maintains the familiar and simple
TiCK user interface
- Single Pushbutton Interface (SBI)
to all functions
- Upgrade your TiCK keyer by simply
plugging in the TiCK-4... It's that easy!
Complete TiCK-4 Feature List
- Two 50 Character user programmable
message memories
- Non-volatile parameter memory
- Speed Adjust (via paddles)
- Tune Function
- Paddle Select
- Sidetone (ON/OFF)
- Iambic Modes A & B
- Straight Key Mode
- Beacon Mode
- Low Current Consumption (1 uA in
sleep mode)
- Requires 3-5V DC for the chip. A 5
volt regulator is in the kit so 9 or 12 volts can be used.
- Uses the very latest in RISC-based
microcontroller technology
- Available in 8 pin DIP package
We are offering the TiCK-4 as follows:
- TiCK-4 Chip + Datasheet,
$15.00, (S/H for CONUS $2.50, DX $5.00)
- TiCK-4 Basic Kit* - includes
TiCK-4 chip, parts, PCB board and manual, $25.00 (S/H for CONUS $2.50,
DX $5.00)
*The Basic DIP parts kit includes:
TiCK-4 Keyer chip, TiCK circuit board (1x1.2"), and construction manual. Board
mounted parts: 5v regulator, 5 capacitors, 3 resistors, 1 PN2222, 1 8 pin DIP
socket. Off-board parts include 1 piezo audio device, 1/8" mono jack, 1/8"
stereo jack, & 1 N.O. momentary switch.
Click here to
see a PDF file of the TiCK4 Data Sheet.
|