PIC-EL III by AA0ZZ
Now with a USB Interface.
Click here to see a 10 - 157 MHz Daughtercard that can be used with the PICEL III as a Signal Generator, or with Control Board as a stand-alone VFO/Signal Generator.
Click to enlarge
PIC-EL III Kits and Components
PIC-EL
III - Full Kit - $65
(with standard 18-pin socket, CD, printed manual, board, all parts)
(option) 18-pin ZIF socket
- $8
(option) 40-pin adapter
board/kit with 40-pin ZIF - $18
(Used to program 40-pin PICs - requires optional 18-pin ZIF)
PIC-EL
III Bare Board - $20
(This is included in the kit)
Programmed 16F628A PIC with
latest diagnostics - $7.50
(This is included in the full kit)
Programmed 18F2550 PIC for
USB Interface - $15.00
(This is included in the full kit)
CD with complete
documentation, PIC code, PICKit2 Application - $9.00
(This is included in the full kit)
PIC-EL III Schematic (JPG format)
PIC-EL III Parts List (PDF format)
PIC-EL III Assembly / Operation Manual (PDF format)
FEATURES
PIC Programmer for 18-pin PICs via PC USB Port
Program these 18-pin PICs: 16F627, 16F627A, 16F628, 16F628A, 16F648A, 16F716,
16F819, 16F84A, 16F88, 18F1220, 18F1230, 18F1320, 18F1330
Program additional PICs by connecting adapters to the PIC-EL's 18-pin DIP socket
or by connecting wires and
adapters to the CONFIG Header.
Test your PIC program with these hardware components:
- 2x16 line LCD (with backlight)
- Rotary encoder
- Three general purpose pushbuttons
- Three LEDs
- Speaker with driver
- Stereo jack for CW paddle input
- Stereo jack with transistor driver to key a transmitter
- Transistor conditioner for converting low-level signals for PIC input
(frequency counter) detection
- Multi-purpose BNC connector for signal I/O
2x7 pin header block - allows attachment of a "foreign programmer" or a "foreign
project board"
16F628A PIC - preprogrammed with PIC-EL diagnostics - included
Designed to be used with PIC programming lessons by WB8RCR (www.amqrp/elmer160/)
Adapter for programming 40-pin PICs (16F877 / 16F877A) also available
NOTES
- Easy to build with 100% through-hole
parts!
- Runs with Microchip's free PICKit2 Application software (supplied with kit)
(Does NOT run with FPP or WinPIC)
- PICKit2 Application runs on Microsoft Windows Operating System (Win98SE,
Win2000, WinXP, Vista)
- Other Microchip PICKit2 Application versions for Linux (not tested) and
Macintosh (not tested)