TiCK2 Keyer - $16
PC Board size is 1" x 1 3/16"
TiCK 2 FEATURES:
- Supports Iambic Modes A & B
- Tune Function
- 3:1 Weighting
- Simple 1 Button User Interface
- User selectable sidetone (ON/OFF)
- Paddle Select - no more turning the paddles upside-down to change DIT-DAH
- Straight Key Mode
- Low Current Consumption (~1 uA @5V in sleep mode)
- Requires 3-5v DC input to the chip. A 5 volt regulator is part of the kit, so it will use 9 or 12 volts.
- Unique Speed Control via Paddles - no bulky or expensive potentiometer required!
- Minimal implementation requires only 4 components to become operational. This includes (1) resistor, (1) cap, (1) NPN transistor, and (1) N.O. switch.
- Can be used in both embedded and stand-alone keyer applications.
- TiCK-2 Chip + datasheet ($5 DIP)
- TiCK-2 Chip + manual, Circuit Board, and Parts ($16 DIP)
Click here to see a PDF file of the TiCK2 Manual
The TiCK2 in an optional enclosure ($15).