TiCK4 - $25
The TiCK-4
offers all the features of the TiCK-1, TiCK-2, TiCK-2B, and TiCK-3, plus it
offers non-volatile parameter memory!
All this in the familiar TiCK 8 pin footprint.
Summary of
TiCK-4 Features
- Two 50 character, user programmable
message memories
- NEW!
Non-volatile parameter memory, means no more resetting speed, mode, and
other settings after power cycling the TiCK! You can configure the
TiCK-4 to you personal settings, and they will remain in effect until YOU
change them!
- Pin-for-pin compatible with all other
TiCKs (TiCK-1 / TiCK-2 / TiCK-2B / TiCK-3)
- Maintains the familiar and simple TiCK
user interface
- Single Pushbutton Interface (SBI) to all
functions
- Upgrade your TiCK keyer by simply
plugging in the TiCK-4... It's
that easy!
Complete TiCK-4
Feature List
- Two 50 Character user programmable
message memories
- Non-volatile parameter memory
- Speed Adjust (via paddles)
- Tune Function
- Paddle Select
- Sidetone (ON/OFF)
- Iambic Modes A & B
- Straight Key Mode
- Beacon Mode
- Low Current Consumption (1 uA in sleep
mode)
- Requires 3-5V DC for the chip. A 5 volt
regulator is in the kit so 9 or 12 volts can be used.
- Uses the very latest in RISC-based
microcontroller technology
- Available in 8 pin DIP package
We are offering the TiCK-4
as follows:
- TiCK-4
Chip + Datasheet, $15.00, (S/H for CONUS $2.50, DX $5.00)
- TiCK-4
Basic Kit* - includes TiCK-4 chip, parts, PCB board and manual, $25.00
(S/H for CONUS $2.50, DX $5.00)
*The Basic DIP parts kit
includes: TiCK-4 Keyer chip,
TiCK circuit board (1x1.2"), and construction manual.
Board mounted parts: 5v regulator, 5 capacitors, 3 resistors, 1 PN2222, 1 8
pin DIP socket. Off-board parts include 1 piezo audio device, 1/8" mono jack,
1/8" stereo jack, & 1 N.O. momentary switch.
Click here to see a PDF file of the
TiCK4 Data Sheet.