TiCK2 Keyer   -  $16

 PC Board size is 1" x 1 3/16"

TiCK 2 FEATURES:

• Supports Iambic Modes A & B
• Tune Function
• 3:1 Weighting
• Simple 1 Button User Interface
• User selectable sidetone (ON/OFF)
• Paddle Select - no more turning the paddles upside-down to change DIT-DAH
• Straight Key Mode
• Low Current Consumption (~1 uA @5V in sleep mode)
• Requires 3-5v DC input to the chip.  A 5 volt regulator is part of the kit, so it will use 9 or 12 volts.
• Unique Speed Control via Paddles - no bulky or expensive potentiometer required!
• Minimal implementation requires only 4 components to become operational. This includes (1) resistor, (1) cap, (1) NPN transistor, and (1) N.O. switch.
• Can be used in both embedded and stand-alone keyer applications.

• TiCK-2 Chip + datasheet ($5 DIP)
• TiCK-2 Chip + manual, Circuit Board, and Parts ($16 DIP)

Click here to see a PDF file of the TiCK2 Manual

The TiCK2 in an optional enclosure ($15).